Which exposure factors are recorded in the process of making a step wedge analysis?

Related MCQs

• If an exposure time of 60 seconds and source to film distance of 365.7 m (1200 feet) is necessary for a particular exposure, what exposure time would be needed for an equivalent exposure if the source- to-film distance is changed to 457.2 m (1500 feet)?
• After the step wedge radiographs have been made, the of the image of each step is recorded on chart:
• When contouring an angle beam wedge for a convex surface, an undesirable result of a wedge which is contoured too well might be:
• A radiograph is made using film X with an exposure of 10 mA-min. Film density obtained in the area of interest is 1.0. If it is desired to achieve a density of 2.0 in the area of interest, what exposure is required? (Log relative exposure = 1.1 for a density of 1.0 and 1.62 for a density of 2.0)
• If the required X ray exposure time for a 225 kV, 5 mA exposure is 3 minutes, approximately what exposure time would be required at 10 mA?
• If the required X ray exposure time for a 150 kV, 5 mA exposure is 2 minutes, approximately what exposure time would be required at 10 mA?
• A radiograph is made using film X with an exposure of 10 mA-min. Film density in the area of interest is 1.0. If it is desired to achieve a density of 2.0 in the area of interest, what exposure is required? (Log relative exposure = 1.1 for a density of 1.0 and 1.62 for a density of 2.0)
• In the radiographic analysis procedure that is used to prepare an exposure chart, the first step is to:
• If we were to maintain the same exposure but decrease the source to film distance, we must the time of exposure:
• If the required exposure time for a 2220 GBq (60 curie) Ir-192 source is 2 minutes, what exposure time would be required at 1110 GBq (30 curie) source: