If the required X ray exposure time for a 225 kV, 5 mA exposure is 3 minutes, approximately what exposure time would be required at 10 mA?

Related MCQs

• If the required X ray exposure time for a 150 kV, 5 mA exposure is 2 minutes, approximately what exposure time would be required at 10 mA?
• If the required exposure time for a 2220 GBq (60 curie) Ir-192 source is 2 minutes, what exposure time would be required at 1110 GBq (30 curie) source:
• If the required exposure time for a 1850 GBq (50 curie) Ir-192 source is 4 minutes, what exposure time would be required for 925 GBq (25 curie) source:
• If the required exposure time for a 50 Curie Ir-192 source is 4 minutes, what exposure time would be required at 25 Curie source:
• If an exposure time of 60 seconds and source to film distance of 365.7 m (1200 feet) is necessary for a particular exposure, what exposure time would be needed for an equivalent exposure if the source- to-film distance is changed to 457.2 m (1500 feet)?
• A good Cobalt-60 shot is made on a 7.6 cm (3 inches) steel casting using an exposure time of 10 minutes and a source-to-film distance of 91.5 (36 inches). If it is necessary to change the source-to-film distance to 61 cm (24 inches), what exposure time would produce a similar radiograph if all other conditions remain the same?
• Approximately what energy X ray machine would be required to have penetrating power equivalent to a Cobalt-60 source:
• A radiograph is made using film X with an exposure of 10 mA-min. Film density obtained in the area of interest is 1.0. If it is desired to achieve a density of 2.0 in the area of interest, what exposure is required? (Log relative exposure = 1.1 for a density of 1.0 and 1.62 for a density of 2.0)
• A radiograph is made using film X with an exposure of 10 mA-min. Film density in the area of interest is 1.0. If it is desired to achieve a density of 2.0 in the area of interest, what exposure is required? (Log relative exposure = 1.1 for a density of 1.0 and 1.62 for a density of 2.0)
• A change in which of the following parameters would necessitate the construction of a new X ray exposure chart?