[Solved] If the radiation intensity is 5.9 Gy/h (590 R/h) at a distance of 30.5 cm (1 foot) from a source, how far is it to the point where the radiation intensity is 0.02 Gy/h (2R/h)?

Q.	If the radiation intensity is 5.9 Gy/h (590 R/h) at a distance of 30.5 cm (1 foot) from a source, how far is it to the point where the radiation intensity is 0.02 Gy/h (2R/h)?
A.	518 cm (17 feet)
B.	16551 cm (543 feet)
C.	8291 cm (272 feet)
D.	17983 cm (590 feet)
Answer» A. 518 cm (17 feet)

2.8k

Do you find this helpful?

View all MCQs in

Non Destructive Testing and Evaluation

Discussion

No comments yet

Related MCQs

A radiographic exposure with 3700 GBq (100 Ci) source of Ir-192 using source to film distance of 60 cm results in a radiation intensity of 0.12 Gy/h (11.8 R/h) and a radiographic density of 2.5. The intensity of radiation needed to obtain the same density when the source to film distance is changed to120 cm is:
If the radiation intensity is 5 Gy/h (500 R/h) at a distance of 152.4 cm (5 feet) from a source, how far is it to the point where the radiation intensity is 0.05 Gy/h (5 R/h)?
At 61 cm (two feet) from a radiation source, radiation intensity is 3 Gy/h (300 R/h). What is the Intensity at 244 cm (8 feet) from the source?
If the radiation intensity is 5 Gy/h (500 R/h) at a distance of 152.4 cm (5 feet) from a source, what is the intensity at 1524 cm (50 feet)?
If the radiation intensity is 1 Gy/h (100 R/h) at a distance of 152.4 cm (5 feet) from a source, what is the intensity at 610 cm (20 feet)?
How does radiation intensity change with increasing distance from the source?
The radiation from 37 GBq (1 Ci) of Co-60 (0.145 Gy or 14.5R at 30.5 cm or 1 foot) is attenuated in air to approximately 5mR/h at a distance of approximately:
A good Cobalt-60 shot is made on a 7.6 cm (3 inches) steel casting using an exposure time of 10 minutes and a source-to-film distance of 91.5 (36 inches). If it is necessary to change the source-to-film distance to 61 cm (24 inches), what exposure time would produce a similar radiograph if all other conditions remain the same?
If an exposure time of 60 seconds and source to film distance of 365.7 m (1200 feet) is necessary for a particular exposure, what exposure time would be needed for an equivalent exposure if the source- to-film distance is changed to 457.2 m (1500 feet)?
Source-to-object distance, object-to-film distance, and source size are the three factors that control the of the radiograph.