The lights in a high intensity viewer are typically:

Related MCQs

• If the radiation intensity is 5 Gy/h (500 R/h) at a distance of 152.4 cm (5 feet) from a source, what is the intensity at 1524 cm (50 feet)?
• If the radiation intensity is 1 Gy/h (100 R/h) at a distance of 152.4 cm (5 feet) from a source, what is the intensity at 610 cm (20 feet)?
• If the radiation intensity is 5.9 Gy/h (590 R/h) at a distance of 30.5 cm (1 foot) from a source, how far is it to the point where the radiation intensity is 0.02 Gy/h (2R/h)?
• If the radiation intensity is 5 Gy/h (500 R/h) at a distance of 152.4 cm (5 feet) from a source, how far is it to the point where the radiation intensity is 0.05 Gy/h (5 R/h)?
• At 61 cm (two feet) from a radiation source, radiation intensity is 3 Gy/h (300 R/h). What is the Intensity at 244 cm (8 feet) from the source?
• A radiographic exposure with 3700 GBq (100 Ci) source of Ir-192 using source to film distance of 60 cm results in a radiation intensity of 0.12 Gy/h (11.8 R/h) and a radiographic density of 2.5. The intensity of radiation needed to obtain the same density when the source to film distance is changed to120 cm is:
• Mercury vapour black lights may be extinguished if the supply voltage drops below about:
• Which of the following discontinuity types could typically be found with a liquid penetrant test?
• For adequate test results, the black light used in fluorescent penetrant examination should provide what minimum black light intensity at the test surface?
• According to ASTM E709-95, the UV intensity shall not be less than: