Two thyristor of same rating and same specifications

Related MCQs

• In a full wave converter (M - 2 connection) feeding an RLE load, the peak thyristor current is 15 A. For fully controlled bridge circuit and same load current, the peak thyristor current will be
• A thyristor is reverse biased. A positive gate pulse is applied. The thyristor
• A single phase half wave converter is used to charge a battery of 50 V. The thyristor is continuously fired by dc signal. Input voltage is v = Vm sin ωt. The thyristor will conduct
• Two thyristors of the same rating and specifications
• The two-transistor model of a thyristor consists of two transistors :
• If ton and toff are the turn on and turn off times of a thyristor, then
• In a single phase half-wave thyristor circuit with R load & Vs=Vm sinωt, the maximum value of the load current can be given by
• A single-phase half-wave thyristor circuit with R load is triggered at an angle of α = 0°. As such, the maximum value of the average output voltage would be given by Consider Vs = Vm sinωt.
• The GTO (gate turn-off thyristor) is a
• In thyristor, holding current is: