In a full wave converter (M - 2 connection) feeding an RLE load, the peak thyristor current is 15 A. For fully controlled bridge circuit and same load current, the peak thyristor current will be

Related MCQs

• In a fully controlled bridge converter feeding a resistive load the waveshapes of output voltage and output current
• A single phase half wave converter is feeding a resistive load. Just before triggering, the voltage across thyristor is
• A single phase half wave converter is used to charge a battery of 50 V. The thyristor is continuously fired by dc signal. Input voltage is v = Vm sin ωt. The thyristor will conduct
• In a single phase full wave regulator feeding a resistive load, the average current over one full cycle
• A semiconverter feeding an RLE load operates in
• In a 3 phase full converter the average load current is 150 A. The average thyristor current is
• In a single phase half-wave thyristor circuit with R load & Vs=Vm sinωt, the maximum value of the load current can be given by
• In a B-2 type full controlled bridge converter
• A single phase half wave controlled rectifier circuit has an R-L load. A freewheeling diode is also in the circuit. When freewheeling diode is conducting the SCR
• In a 3 phase full wave regulator feeding a star connected resistance load the input voltage is 400 V line to line. The firing angle is 160°. The line to line output voltage would be