Surge current rating of an SCR is

Related MCQs

• A single-phase voltage controller, using one SCR in anti parallel with a diode, feeds a load R and Vs = 230 V. For a firing angel of 90° for the SCR, the PMMC voltage connected across R would read
• A 3 kV circuit uses SCR of 800 V rating. If derating is 25%, the number of SCRs in series is
• An SCR is triggered at 40° in the positive half cycle only. The average anode current is 50 A. If the firing angle is changed to 80°, the average anode current is likely to be
• With gate open, the maximum anode current at which SCR is turned off from ON condition is called
• A single phase voltage controller has input of 230 V and a load of 15 Ω resistive. For 6 cycles on and 4 cycles off, determine the average value of SCR current.
• Once SCR starts conducting a forward current, its gate losses control over:
• In an SCR, the anode current is controlled by
• During forward blocking state of SCR, the voltage and current respectively are
• The gate current required to turn on an SCR is
• In an SCR, the anode current consists of