A single-phase voltage controller, using one SCR in anti parallel with a diode, feeds a load R and Vs = 230 V. For a firing angel of 90° for the SCR, the PMMC voltage connected across R would read

Related MCQs

• A single phase voltage controller has input of 230 V and a load of 15 Ω resistive. For 6 cycles on and 4 cycles off, determine the average value of SCR current.
• A single phase half wave controlled rectifier circuit has an R-L load. A freewheeling diode is also in the circuit. When freewheeling diode is conducting the SCR
• In a 3 phase full wave regulator feeding a star connected resistance load the input voltage is 400 V line to line. The firing angle is 160°. The line to line output voltage would be
• On state voltage drop across thyristor used in a 230 V supply system is of the order:
• A resistor connected across the gate and cathode of an SCR in a circuit increases its
• The function of snubber circuit connected across the SCR is to:
• In a 3 phase semiconverter, the freewheeling diode comes into operation only if firing angle
• In a 3 phase full wave regulator feeding resistance load connected in star, the possible range of firing angle a is
• An SCR is triggered at 40° in the positive half cycle only. The average anode current is 50 A. If the firing angle is changed to 80°, the average anode current is likely to be
• A single phase full wave regulator feeds R-L load. The best gating signal is