Type of switch rails generally adopted for modern track, is

Related MCQs

• If the stock rails are B.H. rails, the type of switch generally provided, is
• Study the following statements regarding creep. (i) Creep is greater on curves than on tangent railway track, (ii) Creep in new rails is more than that in old rails, (iii) Creep is more on steep gradients than on level track. The correct answer is
• Due to battering action of wheels over the end of the rails, the rails get bent down and are deflected at ends. These rails are called
• On a straight railway track, absolute levels at point A on two rails are 100.550 m and 100.530 m and the absolute levels at point B 100 m apart are 100.585 m and 100.515 m respectively, the value of twist of rails per metre run, is
• The arrangement of rails which permit trains to cross another track and also to divert to the other track, is called
• Switch angle depends on (i) Heel divergence (ii) Length of tongue rail (iii) Flange-way clearance (iv) Throw of switch The correct answer is
• A kink is made in stock rails, ahead of the toe of switch at a distance of
• Check rails are provided on inner side of inner rails if sharpness of a B.G. curve, is more than
• If absolute levels of rails at the consecutive axles A, B, and C separated by 1.8 metres are 100.505 m, 100.530 m, and 100.525 m respectively, the unevenness of rails, is
• To prevent creep in rails, the steel sleepers are fixed with rails by clips, bolts and