If the stock rails are B.H. rails, the type of switch generally provided, is

Related MCQs

• Type of switch rails generally adopted for modern track, is
• Due to battering action of wheels over the end of the rails, the rails get bent down and are deflected at ends. These rails are called
• A kink is made in stock rails, ahead of the toe of switch at a distance of
• Check rails are provided on inner side of inner rails if sharpness of a B.G. curve, is more than
• Switch angle depends on (i) Heel divergence (ii) Length of tongue rail (iii) Flange-way clearance (iv) Throw of switch The correct answer is
• Bull headed rails are generally provided on
• The type of switch generally used for B.G. and M.G. tracks, is
• On a straight railway track, absolute levels at point A on two rails are 100.550 m and 100.530 m and the absolute levels at point B 100 m apart are 100.585 m and 100.515 m respectively, the value of twist of rails per metre run, is
• If absolute levels of rails at the consecutive axles A, B, and C separated by 1.8 metres are 100.505 m, 100.530 m, and 100.525 m respectively, the unevenness of rails, is
• To prevent creep in rails, the steel sleepers are fixed with rails by clips, bolts and