If a is average number of peaks more than 10 mm of unevenness per kilometre, b is average number peaks more than 6 mm for gauge variation per kilometre and c is average number of peaks more than 2 mm twist per metre, then composite current recording index (Ic), as recommended by Indian Northern Railways, is

Related MCQs

• On a straight railway track, absolute levels at point A on two rails are 100.550 m and 100.530 m and the absolute levels at point B 100 m apart are 100.585 m and 100.515 m respectively, the value of twist of rails per metre run, is
• Mr. W. Simms, the consulting Engineer to the Government of India recommended the gauge for Indian railways
• The lengths of the standard crossings in India for Broad gauge and Metre gauge tracks is same for
• If S and H are strength and hardness index of a timber at 12% moisture content, the composite sleeper index, is
• Composite sleeper index is the index of
• The rail section which is not used on Indian metre gauge tracks, is
• If absolute levels of rails at the consecutive axles A, B, and C separated by 1.8 metres are 100.505 m, 100.530 m, and 100.525 m respectively, the unevenness of rails, is
• On Indian Railways, angle of crossing between gauge faces of Vee, is generally calculated by
• The formation width for a double line Broad Gauge track in cutting (excluding drains) as adopted on Indian Railways is
• Maximum cant deficiency prescribed on Indian Board Gauge Railways, is