longitudinal bars and lateral stirrups, is

Related MCQs

• A reinforced concrete cantilever beam is 3.6 m long, 25 cm wide and has its lever arm 40 cm. It carries a load of 1200 kg at its free end and vertical stirrups can carry 1800 kg. Assuming concrete to carry one-third of the diagonal tension and ignoring the weight of the beam, the number of shear stirrups required, is
• If the diameter of longitudinal bars of a square column is 16 mm, the diameter of lateral ties should not be less than
• The diameter of longitudinal bars of a column should never be less than
• Spacing of stirrups in a rectangular beam, is
• The allowable tensile stress in mild steel stirrups, reinforced cement concrete, is
• If L is the effective span of a R.C.C. beam which is subjected to maximum shear qmax at the ends, the distance from either end over which stirrups for the shear, are provided, is
• In a combined footing if shear stress exceeds 5 kg/cm2 , the nominal stirrups provided are:
• In a combined footing if shear stress does not exceed 5 kg/cm2 , the nominal stirrups provided are
• If the maximum shear stress at the end of a simply supported R.C.C. beam of 6 m effective span is 10 kg/cm2 , the share stirrups are provided for a distance from either end where, is
• If Ac, Asc and A are areas of concrete, longitudinal steel and section of a R.C.C. column and m and c are the modular ratio and maximum stress in the configuration of concrete, the strength of column is