The minimum head room over a stair must be

Related MCQs

• If R and T are rise and tread of a stair spanning horizontally, the steps are supported by a wall on one side and by a stringer beam on the other side, the steps are designed as beams of width
• If T and R are the tread and rise of a stair which carries a load w per square metre on slope, the corresponding load per square metre of the horizontal area, is
• If T and R are tread and rise respectively of a stair, then
• The minimum thickness of the cover at the end of a reinforcing bar should not be less than twice the diameter of the bar subject to a minimum of
• The diameter of the column head support a flat slab, is generally kept
• Enlarged head of a supporting column of a flat slab is technically known as
• If W is total load per unit area on a panel, D is the diameter of the column head, L is the span in two directions, then the sum of the maximum positive bending moment and average of the negative bending moment for the design of the span of a square flat slab, should not be less than
• Minimum spacing between horizontal parallel reinforcement of the same size should not be less than
• is the pre-stressed force applied to tendon of a rectangular pre-stressed beam whose area of cross section is and sectional modulus is. The minimum stress on the beam subjected to a maximum bending moment is
• The minimum clear cover for R.C.C. columns shall be