Minimum spacing between horizontal parallel reinforcement of the same size should not be less than

Related MCQs

• Minimum spacing between horizontal parallel reinforcement of different sizes, should not be less than
• The length of lap in tension reinforcement should not be less than the bar diameter × (actual tension / four times the permissible average bond stress) if it is more than
• The minimum thickness of the cover at the end of a reinforcing bar should not be less than twice the diameter of the bar subject to a minimum of
• As per IS : 456, the reinforcement in a column should not be less than
• The diameter of transverse reinforcement of columns should be equal to one-fourth of the diameter of the main steel rods but not less than
• The spacing of transverse reinforcement of column is decided by the following consideration.
• Lapped splices in tensile reinforcement are generally not used for bars of size larger than
• In the zone of R.C.C. beam where shear stress is less than 5 kg/cm2 , nominal reinforcement is provided at a pitch of
• An R.C.C. beam not provided with shear reinforcement may develop cracks in its bottom inclined roughly to the horizontal at
• The percentage of minimum reinforcement of the gross sectional area in slabs, is