If l1 and l2 are the lengths of long and short spans of a two way slab simply supported on four edges and carrying a load w per unit area, the ratio of the loads split into w1 and w2acting on strips parallel to l2 and l1 is

Related MCQs

• Long and short spans of a two way slab are ly and lx and load on the slab acting on strips parallel to lx and ly be wx and wy respectively. According to Rankine Grashoff theory
• If K is a constant depending upon the ratio of the width of the slab to its effective span l, x is the distance of the concentrated load from the nearer support, bw is the width of the area of contact of the concentrated load measured parallel to the supported edge, the effective width of the slab be is
• If the ratio of long and short spans of a two way slab with corners held down is r, the actual reduction of B.M. is given by
• Design of a two way slab simply supported on edges and having no provision to prevent the corners from lifting, is made by
• If the sides of a slab simply supported on edges and spanning in two directions are equal, the maximum bending moment is multiplied by
• If the maximum bending moment of a simply supported slab is M Kg.cm, the effective depth of the slab is (where Q is M.R. factor)
• According to I.S. : 456, slabs which span in two directions with corners held down, are assumed to be divided in each direction into middle strips and edge strips such that the width of the middle strip, is
• The floor slab of a building is supported on reinforced cement floor beams. The ratio of the end and intermediate spans is kept
• The maximum ratio of span to depth of a slab simply supported and spanning in two directions, is
• A simply supported beam 6 m long and of effective depth 50 cm, carries a uniformly distributed load 2400 kg/m including its self weight. If the lever arm factor is 0.85 and permissible tensile stress of steel is 1400 kg/cm2 , the area of steel required, is