In a combined footing for two columns carrying unequal loads, the maximum hogging bending moment occurs at

Related MCQs

• To ensure that the hogging bending moment at two points of suspension of a pile of length L equals the sagging moment at its centre, the distances of the points of suspension from either end, is
• If the length of a combined footing for two columns l metres apart is L and the projection on the left side of the exterior column is x, then the projection y on the right side of the exterior column, in order to have a uniformly distributed load, is (where is the distance of centre of gravity of column loads).
• If q is the punching shear resistance per unit area a, is the side of a square footing for a column of side b, carrying a weight W including the weight of the footing, the depth (D) of the footing from punching shear consideration, is
• If W is total load per unit area on a panel, D is the diameter of the column head, L is the span in two directions, then the sum of the maximum positive bending moment and average of the negative bending moment for the design of the span of a square flat slab, should not be less than
• Top bars are extended to the projecting parts of the combined footing of two columns Ldistance apart for a distance of
• If is the net upward pressure on a square footing of side for a square column of side , the maximum bending moment is given by
• For stairs spanning l metres longitudinally between supports at the bottom and top of a flight carrying a load w per unit horizontal area, the maximum bending moment per metre width, is
• is the pre-stressed force applied to the tendon of a rectangular pre-stressed beam whose area of cross section is and sectional modulus is . The maximum stress in the beam, subjected to a maximum bending moment , is
• For a circular slab carrying a uniformly distributed load, the ratio of the maximum negative to maximum positive radial moment, is
• If the sides of a slab simply supported on edges and spanning in two directions are equal, the maximum bending moment is multiplied by