In a simple supported beam having length = l and subjected to a concentrated load (W) at mid-point.

Related MCQs

• In a cantilever subjected to a combination of concentrated load, uniformly distributed load and uniformly varying load, Maximum bending moment is
• In a cantilever subjected to a concentrated load (W) at the free end and having length =l, Maximum bending moment is
• A uniformly distributed load of 20 kN/m acts on a simply supported beam of rectangular cross section of width 20 mm and depth 60 mm. What is the maximum bending stress acting on the beam of 5m?
• For any part of the beam, between two concentrated load Shear force diagram is a
• For any part of a beam between two concentrated load, Bending moment diagram is a
• For any part of the beam, between two concentrated load Shear force diagram is a
• A simply supported beam 6 m long and of effective depth 50 cm, carries a uniformly distributed load 2400 kg/m including its self weight. If the lever arm factor is 0.85 and permissible tensile stress of steel is 1400 kg/cm2, the area of steel required, is
• A bar 2 m long and 20 mm diameter is subjected to an axial pull of 125.6 KN. Due to this load, length increases by 4 mm and diameter reduce by 0.012 mm. Find Poison‟s ratio.
• For any part of a beam subjected to uniformly distributed load, Shear force diagram is
• For any part of a beam subjected to uniformly distributed load, bending moment diagram is