In -------- fracture the surface obtained in shining and accompanied with the formation of slip planes.

Related MCQs

• ------ slip is process where by a screw dislocation glides into another slip plane having a slip direction in common with the original slip plane.
• the planes along which mirror image is formed is called planes
• the resolved shear stress of a unit cell in nickel is N/mm2 if a tensile stress of 13.7 Mpa is applied. Take angle between the axial force and slip direction is 450 and angle between axial force and normal to slip is 540
• slip direction is direction in the slip plane which has                   
• The property of the material which enables the formation of permanent deformation without fracture is known as
• working is always accompanied by strain hardening
• -------- working is always accompanied by strain hardening.
• ......... working as always accompanied by strain hardening
• tensile test was conducted on a steel specimen of diameter 20 mm and gauge length 75 mm. the gauge length and diameter during fracture are 95 mm and 12 mm respectively. Its elongation is
• tensile test was conducted on a steel specimen of diameter 20 mm and gauge length 75 mm. the gauge length and diameter during fracture are 95 mm and 12 mm respectively. If load at upper yield point is 500 kg, the upper yield stress is