Terzaghi's bearing capacity factors Nc, Nq and Nr are functions of

Related MCQs

• For determining the ultimate bearing capacity of soil, the recommended size of a square bearing plate to be used in load plate test should be 30 to 75 cm square with a minimum thickness of
• In the plate loading test for determining the bearing capacity of soil, the size of square bearing plate should be
• The bearing capacity of a soil depends upon
• The rise of water table below the foundation influences the bearing capacity of soil mainly by reducing
• Rise of water table in cohesion-less soils upto ground surface reduces the net ultimate bearing capacity approximately by
• A 600 mm square bearing plate settles by 15 mm in plate load test on a cohesion-less soil under an intensity of loading of 0.2 N/ram². The settlement of a prototype shallow footing 1 m square under the same intensity of loading is
• A 300 mm square bearing plate settles by 15 mm in a plate load test on a cohesive soil when the intensity of loading is 0.2 N/mm². The settlement of a prototype shallow footing 1 m square under the same intensity of loading is
• Allowable bearing pressure for a foundation depends upon
• A pile is being driven with a drop hammer weighing 1800 kg and having a free fall of 1.00 m. If the penetration with last blow is 5 mm, the load carrying capacity of the pile, -according to the Engineering News formula, is
• Stoke's law states that the velocity at which a grain settles out of suspension, the other factors remaining constant, is dependent upon