The effective length of a fillet weld designed to transmit axial load shall not be less than

Related MCQs

• A strip of steel (E = 200 GPa, 0.25) has a length of 1 m, width of 200 mm and thickness of 10 mm. A line of length 1 m is drawn parallel to its length on one of its side surfaces. When the strip is subjected to an axial tensile force of 100 kN, the length of the line will be                  mm.
• A square steel bar 20 mm on a side is subjected to an axial compressive load of 8 kN. The normal stress acting on plane 30? to the line action of the axial load will be
• Effective throat thickness of a fillet weld is
• Size of a right angled fillet weld is given by
• Size of fillet weld with unequal legs is equal to
• Weakest section in a fillet weld is
• Effective length of a weld is equal to
• The ratio of bending moment at the centre of a simply supported beam of effective length L subjected to a central load W with that when the load W is uniformly distributed, will be
• The maximum bending moment of a cantilever beam of length l and carrying a uniformly distributed load of w per unit length lies at the middle of its length.
• A solid circular shaft of diameter D carries are axial load W. If the same load is applied axially on a hollow circular shaft of inner diameter D/2, the ratio of stress in a solid shaft to a hallow one is