The diagram showing the variation of axial load along the span is called

Related MCQs

• a diagram which respresents the variation of axial load along the length of simply supported beam is called
• A simply supported beam of span L which carries over its full span a load varying uniformly from zero at either ends to W kg/m at mid-span, will have zero shear force at
• A square steel bar 20 mm on a side is subjected to an axial compressive load of 8 kN. The normal stress acting on plane 30? to the line action of the axial load will be
• A solid circular shaft of diameter D carries are axial load W. If the same load is applied axially on a hollow circular shaft of inner diameter D/2, the ratio of stress in a solid shaft to a hallow one is
• An axial load P is applied on a circular section of diameter D. If the same load is applied on a hollow circular shaft with inner diameter as D/2, the ratio of stress in two cases would be
• A beam ABC rests on simple supports at A and B with BC as an overhang. D is centre of span AB. If in the first case a concentrated load P acts at C while in the second case load P acts at D, then the
• There is always a limiting value of load up to which the strain totally disappears on the removal of load; the stress corresponding to this load is called…………
• A uniformly distributed load may be assumed to behave like a point load at the centre of gravity of the load for all sorts of calculations.
• If ES = 3 EA , the stress in steel of a composite bar made of aluminium and steel strips each having a cross sectional area of 300 mm2 and subjected to an axial load of 12 kN
• The effective length of a fillet weld designed to transmit axial load shall not be less than