Laminated springs are subjected to

Related MCQs

• Laminated springs are generally
• A composite spring is made by joining two springs end to end one spring having twice the stiffness of the other. The ratio of the stiffness of the composite spring to that of the stiffness of the two springs could be
• Two closely-coiled helical springs 'A' and 'B' of the same material, same number of turns and made from same wire are subjected to an axial load W. The mean diameter of spring 'A' is double the mean diameter of spring 'B'. The ratio of deflections in spring 'B' to spring 'A' will be
• A steel bar 2 m long, 20 mm wide and 10 mm thick is subjected to a pull of 2 kN. If the same bar is subjected to a push of 2 kN, the Poission's ratio of the bar in tension will be
• A body is subjected to a tensile stress of 1200 MPa on one plane and another tensile stress of 600 MPa on a plane at right angles to the former. It is also subjected to a shear stress of 400 MPa on the same planes. The maximum normal stress will be
• A laminated spring is given an initial curvature because
• A laminated spring is supported at
• In laminated spring the strips are provided in different lengths for
• Two closely coiled helical springs 'A' and 'B' are equal in all respects but the number of turns of spring 'A' is half that of spring 'B'. The ratio of deflections in spring 'A' to spring 'B' is
• The springs in brakes and clutches are used to