Unit operation involved in the prilling of urea is

Related MCQs

• The operation involved when the soluble material is largely on the surface of an insoluble solid and is merely washed off by the solvent is called
• Removal of __________ exemplifies an adsorption unit operation.
• Adsorption is a unit operation which generally involves __________ systems.
• H2S is being absorbed in a gas absorber unit. The height of the transfer unit based on the overall mass transfer coefficient on the gas side is 0.4 m. The equilibrium data is given by, y = 1.5 x. The bulk concentration of H2S has to be reduced from 0.05 to 0.001 mole fraction in the gas side. The height of the tower (in metres) corresponding to an operating line given by, y = 5x + 0.001 is
• For the gas absorption, the height of a transfer unit, based on the gas phase is given by (G: superficial molar gas velocity, L: superficial molar liquid velocity, FG: mass transfer co-efficient, moles/m2, a: interfacial area per unit volume of tower)
• Compound A is extracted from a solution of A + B into a pure solvent S. A Co-current unit is used for the liquid-liquid extraction. The inlet rate of the solution containing A is 200 moles of B/hr.m2 and the solvent flow, rate is 400 moles of S/m2 . hr. The equilibrium data is represented by Y = 3X2 , where Y is in moles of a A/moles of B and X is in moles A/moles of S. The maximum percentage extraction achieved in the unit is
• Plate towers are preferred to packed towers, when large temperature changes are involved, because of the reason that the
• 'Absorption with chemical reaction' is involved in the removal of
• The value of „L/mG’ ratio for economical absorption operation ranges from
• In gas-liquid contact operation, the number of ideal stages, N = (xa - xb)/(xb - x*b). This is true when the stripping factor 'S' is