Torque transmitted by single plate clutch with axial spring load = 1 kN, and inner and outer radii of 10 cm and 15 cm and µ = 0.5 with assumption of uniform wear is ____.

Related MCQs

• A multiple clutch with 5 plate transmits torque of 400 N-m. If µ = 0.5 and inner radius = 10 cm and outer radius = 15 cm and four spring expert-axial and load per spring is ___.
• A single plate clutch is transmitting power, the inner and other radii of the plate are 10 cm and 22.5 cm respectively. Using the radius uniform wear theory, the maximum pressure intensity occurs at a radius of ____.
• The ratio of friction torque transmitted for uniform pressure to frictional torque transmitted for uniform wear in case of flat pivot, is equal to_______.
• In case of flat pivot bearing the frictional torque transmitted for uniform pressure as compared to the frictional torque transmitted for uniform wear_____.
• For flat and conical pivots, the ratio of friction torque with uniform wear to friction torque with uniform pressure is ____.
• The ratio of frictional torque produced for uniform wear to frictional torque produced for uniform pressure is ____.
• The ratio of friction torque for uniform pressure to uniform wear for the same dimensions and load is _______.
• The ratio of frictional torque produced for uniform wear to that for uniform pressure is ____.
• For uniform wear, the ratio of frictional torque for a flat collar bearing to the frictional torque for conical collar bearing is equal to____. Where ϴ=semi-angle of the cone
• A flat footstep bearing 10 cm radius supports a load of 3 kN. The shaft runs at 600/π r.p.m. and co-efficient of friction is 0.1. The friction torque and frictional power in watts with uniform wear are respectively.