A multiple clutch with 5 plate transmits torque of 400 N-m. If µ = 0.5 and inner radius = 10 cm and outer radius = 15 cm and four spring expert-axial and load per spring is ___.

Related MCQs

• Torque transmitted by single plate clutch with axial spring load = 1 kN, and inner and outer radii of 10 cm and 15 cm and µ = 0.5 with assumption of uniform wear is ____.
• A single plate clutch is transmitting power, the inner and other radii of the plate are 10 cm and 22.5 cm respectively. Using the radius uniform wear theory, the maximum pressure intensity occurs at a radius of ____.
• Frictional torque transmission through plate clutch is equivalent to____
• Frictional torque transmission through multi plate clutch is equivalent to____.
• For multiple plate clutch having 'n' is the effective number of surfaces for transmitting power then no. of plates are
• For multiple plate friction clutch with n plates, the number of active surfaces n
• Following are the details pertaining to thrust bearing 1) External and internal dia of contacting surfaces-320 mm and 200 mm resp. 2) Axial load-80 kN 3)Pr. Intensity-350 kN/m2 4) shaft speed-400 rpm 5)coefficient of friction-0.06 Calculate power lost in overcoming friction. the frictional torque and power lost in frictional
• Determine the axial force required to engage a cone clutch transmitting 25 kW power at 750 rpm. Average friction diameter of the cone is 400 mm, semicone angle 10 degree and coefficient of friction 0.25.
• Determine the axial force required to engage a cone clutch transmitting 25 kW power at 750 rpm. Average friction diameter of the cone is 400 mm, semicone angle 60 degree and coefficient of friction 0.25.
• The frictional torque transmitted by a disc clutch is same as that of _____.