Two rods have uniform cross section areas in the ratio 1 : 2 and are subjected to axial tensile forces of the same magnitude. The stresses induced in the two rods will be in the ratio __ _ .

Related MCQs

• Two rods have uniform cross section areas in the ratio 1 : 2 and are subjected to axial tensile forces with magnitudes in the ratio 2 : 1. The stresses induced in the two rods will be in the ratio ____ _.
• Two rods have uniform cross section areas in the ratio 1 : 2 and are subjected to axial tensile forces with magnitudes in the ratio 1 : 2. The stresses induced in the two rods will be in the ratio ____ _.
• Two beams, one of circular cross-section and other of square cross-section, have equal areas of cross-section. If subjected to bending
• Two beams, one of circular cross-section and the other of square cross-section, have equal areas of cross-sections. When these beams are subjected to bending.
• The change in length of a rod of uniform cross section was found to be 2 mm for some applied force. The change in length of a rod of the same material and length but of twice the cross section area subjected to the same force will be__ mm.
• Two bars of different materials are of the same size and are subjected to same tensile forces. If the bars have unit elongations in the ratio of 4 : 7, then the ratio of moduli of elasticity of the two materials is
• Two bars of sifferent materials are of the same size and are subjected to same tensile forces. If the bars have unit elongation in the ratio of 7 : 3, then the ratio of modulii of elasticity of the two materials is
• A stepped bar of steel consists of a pmormtion with cross section area 500 mm2 connected to a portion with cross section area 1000 2. Each portion has a length of 1 m. The modulus of elasticity of steel is 200 GPa. The maximum elongation of the bar by applying an axial tensile force at the ends without exceeding a stress of 100 MPa is    mm.
• A steel bar ABC (E = 200 GPa) is 1 m long. For AB = 0.7 m, it has cross section P area of 500 mm2 and for BC = 0.3 m the cross section area is 400 mm2. The bar is subjected to an axial pull of 100 kN. The stress is maximum in ___ _
• Two bars of different materials and same size are subjected to the same tensile force. If the bars have unit elongation in the ratio of 2 : 5, then the ratio of modulus of elasticity of the two materials will be