Two bars of different materials are of the same size and are subjected to same tensile forces. If the bars have unit elongations in the ratio of 4 : 7, then the ratio of moduli of elasticity of the two materials is

Related MCQs

• Two bars of sifferent materials are of the same size and are subjected to same tensile forces. If the bars have unit elongation in the ratio of 7 : 3, then the ratio of modulii of elasticity of the two materials is
• Two bars of different materials and same size are subjected to the same tensile force. If the bars have unit elongation in the ratio of 2 : 5, then the ratio of modulus of elasticity of the two materials will be
• Two rods have uniform cross section areas in the ratio 1 : 2 and are subjected to axial tensile forces of the same magnitude. The stresses induced in the two rods will be in the ratio __ _ .
• Two rods have uniform cross section areas in the ratio 1 : 2 and are subjected to axial tensile forces with magnitudes in the ratio 2 : 1. The stresses induced in the two rods will be in the ratio ____ _.
• Two rods have uniform cross section areas in the ratio 1 : 2 and are subjected to axial tensile forces with magnitudes in the ratio 1 : 2. The stresses induced in the two rods will be in the ratio ____ _.
• A body is subjected to a tensile stress of 1200 MPa on one plane and another tensile stress of 600 MPa on a plane at right angles to the former. It is also subjected to a shear stress of 400 MPa on the same planes. The maximum normal stress will be
• When a body is subjected to a direct tensile stress (?), maximum normal stress is equal to the direct tensile stress.
• A prismatic bar of volume V is subjected to a tensile force in longitudinal direction. If Poisson's ratio of the material is u and longitudinal strain is e, then the final volume of the bar becomes
• Two closely-coiled helical springs 'A' and 'B' of the same material, same number of turns and made from same wire are subjected to an axial load W. The mean diameter of spring 'A' is double the mean diameter of spring 'B'. The ratio of deflections in spring 'B' to spring 'A' will be
• A steel bar 2 m long, 20 mm wide and 10 mm thick is subjected to a pull of 2 kN. If the same bar is subjected to a push of 2 kN, the Poission's ratio of the bar in tension will be