1MPa is equal to

Related MCQs

• When two shafts of same length, one of which is hollow, transmit equal torques and have equal maximum stress, then they should have equal
• A material has modulus of rigidity equal to 0.4x105 N/mm2 and Bulk modulus equal to 0.95 x105 N/mm2 The Young’s modulus value in GPa is..
• A beam of overall length 1 with equal overhangs on both sides carries a uniformly distributed load over the entire length. To have numerically equal bending moments at centre of the beam and at supports, the distance between the supports should be
• A beam of overall length / rests on two simple supports with equal overhangs on both sides. Two equal loads act at the free ends. If the deflection at the centre of the beam is the same as at either end, then the length of either overhang is
• A shaft of diameter D is subjected to a twisting moment (T) and a bending moment (M). If the maximum bending stress is equal to maximum shear stress developed, then M is equal to
• Two beams of equal cross-sectional area are subjected to equal bending moment. If one beam has square cross-section and the other has circular section, then
• The modulus of elasticity for mild steel is approximately equal to
• Engineering stress strain curve and true stress strain curve are equal up to
• If L and dL are are length and change in length respectively, then strain is equal to
• If D is the diameter of the sphere, then volumetric strain is equal to