Which of the following gives the correct decreasing order of the densities of a soil sample?

Related MCQs

• The difference between maximum void ratio and minimum void ratio of a sand sample is 0.30. If the relative density of this sample is 66.6% at a void ratio of 0.40, then the void ratio of this sample at its loosest state will be
• A soil sample is having a specific gravity of 2.60 and a void ratio of 0.78. The water content in percentage required to fully saturate the soil at that void ratio will be
• A sample of soil has liquid limit 45%, plastic limit 25%, shrinkage limit 17% and natural moisture content 30%. The consistency index of the soil is
• For a given soil mass, the void ratio is 0.60, water content is 18% and specific gravity of the soil particles is 2.6. The degree of saturation of the soil is
• A sample of clay and a sample of sand have the same specific gravity and void ratio. Their pemeabilities will differ because
• A dry soil sample weighing 100 g has volume of 60 ml and specific gravity 2.5. Its void ratio is
• The maximum water content of a saturated soil at which a reduction in its moisture does not cause a decrease in volume of the soil, is called
• The active earth pressure of a soil is defined as the lateral pressure exerted by soil
• The lateral earth pressure exerted by the soil when the retaining wall moves into the soil, is known as
• The net soil pressure is obtained by multiplying the net ultimate bearing capacity of soil to the factor of safety.