A sand with greater relative density exhibits

Related MCQs

• The difference between maximum void ratio and minimum void ratio of a sand sample is 0.30. If the relative density of this sample is 66.6% at a void ratio of 0.40, then the void ratio of this sample at its loosest state will be
• The dry density of a soil is 1.5 g/cm3. If the saturation water content is 50%, then its saturated density and submerged density will respectively be
• The dry sand specimen is put through a triaxial test. The cell pressure is 50 kPa and the deviator stress at failure is 100 kPa. The angle of internal friction for the sand specimen is
• The density of sand at which there is no change in volume under the influence of shearing strain produced due to shear stress, is called
• Quich sand is a
• The unit bearing capacity of footing in sand
• The settlement of a footing in sand depends upon the
• The angle of internal friction of round grained loose sand is about
• In the design of footings on sand, if the angle of internal friction is equal to 36?, the bearing capacity factors for
• The angle of shearing resistance for dry loose sand is same as that of angle of internal friction.