A beam of triangular section is placed with its base horizontal. The maximum shear stress occurs at

Related MCQs

• A beam of triangular cross section is placed with its base horizontal. The maximum shear stress intensity in the section will be
• A beam of square cross-section with side 100 mm is placed with one diagonal vertical. If the shear force acting on the section is 10 kN, the maximum shear stress is
• The maximum shear stress of a beam of triangular section occurs above the neutral axis.
• A beam of rectangular cross-section is 100 mm wide and 200 mm deep. If the section is subjected to a shear force of 20 kN, then the maximum shear stress in the section is
• The ratio of maximum shear stress to average shear stress in case of a circular beam transmitting power is equal to
• The ratio of maximum shear stress to the average shear stress in a rectangular beam subjected to torsion is
• The ratio of average shear stress to maximum shear stress for a circular section is
• A body is subjected to a tensile stress of 1200 MPa on one plane and another tensile stress of 600 MPa on a plane at right angles to the former. It is also subjected to a shear stress of 400 MPa on the same planes. The maximum normal stress will be
• At a point in a steel member, the major principal stress is 2000 kg/cm2 and the minor principal stress is compressive. If the uni-axial tensile yield stress is 2500 kg/cm2, then the magnitude of the minor principal stress at which yielding will commence, according to the maximum shearing stress theory, is
• The ratio of maximum shear stress developed in a rectangular beam and a circular beam of the same cross-sectional area is