The ratio of average shear stress to maximum shear stress for a circular section is

Related MCQs

• The ratio of maximum shear stress to average shear stress in case of a circular beam transmitting power is equal to
• A solid circular shaft and a thin walled circular tube made of the same material and having the same weight are stressed in torsion to the same maximum shear stress. The ratio of the amounts of strain energy stored in the two shafts would be
• The ratio of maximum shear stress to the average shear stress in a rectangular beam subjected to torsion is
• A beam of rectangular cross-section is 100 mm wide and 200 mm deep. If the section is subjected to a shear force of 20 kN, then the maximum shear stress in the section is
• An axial hoad is applied on a circular section of diameter D. If the same load is applied on hollow circular section with inner diameter D/2, the ratio of stress in two cases would be
• A beam of square cross-section with side 100 mm is placed with one diagonal vertical. If the shear force acting on the section is 10 kN, the maximum shear stress is
• An axial load P is applied on a circular section of diameter D. If the same load is applied on a hollow circular shaft with inner diameter as D/2, the ratio of stress in two cases would be
• A body is subjected to a tensile stress of 1200 MPa on one plane and another tensile stress of 600 MPa on a plane at right angles to the former. It is also subjected to a shear stress of 400 MPa on the same planes. The maximum normal stress will be
• In case of thin walled cylinders the ratio of hoop stress to maximum shear stress stress is
• The ratio of maximum shear stress developed in a rectangular beam and a circular beam of the same cross-sectional area is