The extremeties of any diameter on Mohr's circle represent

Related MCQs

• The diameter of corresponding Mohr circle will represent
• Two shafts 'A' and 'B' have the same material. The shaft 'A' is solid of diameter 100 mm. The shaft 'B' is hollow with outer diameter 100 mm and inner diameter 50 mm. The torque transmitted by shaft 'B' is
• Two shafts 'A' and 'B' are made of same material. The shaft 'A' is solid and has diameter D. The shaft 'B' is hollow with outer diameter D and inner diameter D / 2. The strength of hollow shaft in torsion is
• Two rods A and B are subjectd to equal load P. Rod A is tapering with bigger diameter D at the support and small end diameter as D/2. Rod B is of uniform cross section with diameter D. The ratio of elongation of rod A to that of B would be
• The closed-coiled helical springs are made from the same small diameter wire, one wound on 2.5 cm diameter core and the other on 1.25 cm diameter core. If each spring has n coils, the ratio of their spring constants would be
• A metal plate of length L and width b has a circle drawn on it. If it is subjected to a compressive stress acting along its width, the circle will
• For no tension condition in the base of a short column of circular section, the line of action of the load should be within a circle of diameter equal to
• A short column of external diameter of 250 mm and internal diameter of 150 mm carries an eccentric load of 1000 kN. The greatest eccentricity which the load can have without producing tension anywhere is
• Two closely-coiled helical springs 'A' and 'B' of the same material, same number of turns and made from same wire are subjected to an axial load W. The mean diameter of spring 'A' is double the mean diameter of spring 'B'. The ratio of deflections in spring 'B' to spring 'A' will be
• Two shafts 'A' and 'B' are made of same material. The shaft 'A' is of diameter D and shaft 'B' is of diameter D / 2. The strength of shaft 'B' is