The diameter of corresponding Mohr circle will represent

Related MCQs

• The extremeties of any diameter on Mohr's circle represent
• The radius of Mohr's circle for two equal unlike principal stresses of magnitude p is
• The maximum shear stress is equal to the radius of Mohr's circle.
• Mohr's circle is used to determine the stresses on an oblique section of a body subjected to
• Two shafts 'A' and 'B' have the same material. The shaft 'A' is solid of diameter 100 mm. The shaft 'B' is hollow with outer diameter 100 mm and inner diameter 50 mm. The torque transmitted by shaft 'B' is
• Two shafts 'A' and 'B' are made of same material. The shaft 'A' is solid and has diameter D. The shaft 'B' is hollow with outer diameter D and inner diameter D / 2. The strength of hollow shaft in torsion is
• Two rods A and B are subjectd to equal load P. Rod A is tapering with bigger diameter D at the support and small end diameter as D/2. Rod B is of uniform cross section with diameter D. The ratio of elongation of rod A to that of B would be
• The closed-coiled helical springs are made from the same small diameter wire, one wound on 2.5 cm diameter core and the other on 1.25 cm diameter core. If each spring has n coils, the ratio of their spring constants would be
• A metal plate of length L and width b has a circle drawn on it. If it is subjected to a compressive stress acting along its width, the circle will
• For no tension condition in the base of a short column of circular section, the line of action of the load should be within a circle of diameter equal to