The centre to centre distance, between two consecutive rivets in a row, is called

Related MCQs

• In a riveted joint, when the rivets in the adjacent rows are staggered in such a way that every rivet is in the middle of the two rivets of the opposite row, the joint is said to be diamond riveted.
• In a riveted joint, when the number of rivets decreases from the inner most row to outer most row, the joint is said to be
• A flat carrying a pull of 69C kN is con-nected to a gusset plate using rivets. If the pulls required to shear the rivet, to crush the rivet and to tear the plate per pitch length are 68.5 kN, 46 kN and 69 kN respectively, then the number of rivets required is
• The distance between the centres of rivets in adjacent rows of zig-zag riveted joint, is called back pitch.
• A type of riveted joint in which the rivets in the adjacent rows are staggered and the outer-most row has only rivert, is known as
• When one plate overlaps the other and the two plates are riveted together with two rows of rivets, the joint is known as
• When two main plates are kept in alignment butting each other and riveted with cover plate on both sides of the main plates with two rows of rivets in each main plate, the joint is known as
• The perpendicular distance between the centre lines of the successive rows, is called pitch.
• The distance between the centre of a rivet hole to the nearest edge of plate, is called
• A beam of overall length 1 with equal overhangs on both sides carries a uniformly distributed load over the entire length. To have numerically equal bending moments at centre of the beam and at supports, the distance between the supports should be