The perpendicular distance between the centre lines of the successive rows, is called pitch.

Related MCQs

• The distance between the centres of rivets in adjacent rows of zig-zag riveted joint, is called back pitch.
• The centre to centre distance, between two consecutive rivets in a row, is called
• The distance between the centre of a rivet hole to the nearest edge of plate, is called
• A beam of overall length 1 with equal overhangs on both sides carries a uniformly distributed load over the entire length. To have numerically equal bending moments at centre of the beam and at supports, the distance between the supports should be
• A cantilever beam carries a uniformly distributed load from fixed end to the centre of the beam in the first case and a uniformly distributed load of same inten¬sity from centre of the beam to the free end in the second case. The ratio of deflections in the two cases is
• If the length of a simply supported beam carrying a concentrated load at the centre is doubled, the defection at the centre will become
• The shear force at the centre of a simply supported beam with a gradually varying load from zero at both ends to w per metre at the centre, is
• The maximum bending moment for a simply supported beam with a gradually varying load from zero at both ends and w per metre at the centre, lies at the centre of a beam.
• The bending moment at the centre of a simply supported beam with a gradually varying load from zero at both ends to w per metre at the centre is wl / 4.
• A flat carrying a pull of 69C kN is con-nected to a gusset plate using rivets. If the pulls required to shear the rivet, to crush the rivet and to tear the plate per pitch length are 68.5 kN, 46 kN and 69 kN respectively, then the number of rivets required is