A localised compressive stress at the area of contact between two members is known as

Related MCQs

• A localized compressive stress at the area of contact between two members is known as ……………..stress.
• At a point in a steel member, the major principal stress is 2000 kg/cm2 and the minor principal stress is compressive. If the uni-axial tensile yield stress is 2500 kg/cm2, then the magnitude of the minor principal stress at which yielding will commence, according to the maximum shearing stress theory, is
• A localized compressive stress at the area of contact between the two surfaces is called as
• In a thick cylindrical shell subjected to an internal pressure (p), the tangential stress is always a tensile stress where as the radial stress is a compressive stress
• The safe value of stress under which a member subjected to reversible tensile or compressive stress will not fail is known as
• A body is subjected to a tensile stress of 1200 MPa on one plane and another tensile stress of 600 MPa on a plane at right angles to the former. It is also subjected to a shear stress of 400 MPa on the same planes. The maximum normal stress will be
• On one side of a neutral axis of a beam, there is a tensile stress and on the other side of the beam there is a compressive stress
• A prismatic steel bar 25 cm long is subjected to axial compressive force of 2000 kg. For steel E = 2 x 106 kg/cm2. The ratio of strain energy when the cross-sectional area is 25 sq. cm to that when the cross-section area is 12.5 sq cm, would be
• A body is subjected to two normal stresses 20 kN / m2 (tensile) and 10 kN / m2 (compressive) acting perpendicular to each other. The maximum shear stress is
• When a body is subjected to two equal and opposite pushes, as a result of which the body tends to reduce its length, the stress and strain induced is compressive.