A prismatic steel bar 25 cm long is subjected to axial compressive force of 2000 kg. For steel E = 2 x 106 kg/cm2. The ratio of strain energy when the cross-sectional area is 25 sq. cm to that when the cross-section area is 12.5 sq cm, would be

Related MCQs

• A prismatic bar of volume V is subjected to a tensile force in longitudinal direction. If Poisson's ratio of the material is u and longitudinal strain is e, then the final volume of the bar becomes
• A steel bar 2 m long, 20 mm wide and 10 mm thick is subjected to a pull of 2 kN. If the same bar is subjected to a push of 2 kN, the Poission's ratio of the bar in tension will be
• A steel bar ABC (E = 200 GPa) is 1 m long. For AB = 0.7 m, it has cross section P area of 500 mm2 and for BC = 0.3 m the cross section area is 400 mm2. The bar is subjected to an axial pull of 100 kN. The stress is maximum in ___ _
• A square steel bar 20 mm on a side is subjected to an axial compressive load of 8 kN. The normal stress acting on plane 30? to the line action of the axial load will be
• A stepped bar of steel consists of a pmormtion with cross section area 500 mm2 connected to a portion with cross section area 1000 2. Each portion has a length of 1 m. The modulus of elasticity of steel is 200 GPa. The maximum elongation of the bar by applying an axial tensile force at the ends without exceeding a stress of 100 MPa is    mm.
• A bar of 30 mm diameter is subjected to an axial force 280 KN length of bar is 400 m and E= 200GPa. Determine volumetric strain if m=4.
• A circular section of steel 20 mm diameter is subjected to an axial force of 100 kg. The components of force normal and tangential to a plane inclined to the axis of bar will be
• If ES = 3 EA , the stress in steel of a composite bar made of aluminium and steel strips each having a cross sectional area of 300 mm2 and subjected to an axial load of 12 kN
• At a point in a steel member, the major principal stress is 2000 kg/cm2 and the minor principal stress is compressive. If the uni-axial tensile yield stress is 2500 kg/cm2, then the magnitude of the minor principal stress at which yielding will commence, according to the maximum shearing stress theory, is
• Slenderness ratio of a 5 m long column hinged at both ends and having a circular crosssection with diameter 160 mm is