If ICCH is specified as 1.1 mA when VCC is 5 V and if the gate is in a static (noncharging) HIGH output state, the power dissipation (PD) of the gate is

Related MCQs

• Assume that a particular IC has a supply voltage (Vcc) equal to +5 V and ICCH = 10 mA and ICCL = 23 mA. What is the power dissipation for the chip?
• The power dissipation, PD, of a logic gate is the product of the
• The inverter OR-gate and AND gate are called deeision-making elements because they can recognize some input while disregarding others. A gate
• An output gate is connected to four input gates; the circuit does not function. Preliminary tests with the DMM indicate that the power is applied; scope tests show that the primary input gate has a pulsing signal, while the interconnecting node has no signal. The four load gates are all on different ICs. Which instrument will best help isolate the problem?
• If the region beneath the gate is left initially uncharged the gate field must induce a channel before current can flow. Thus the gate voltage enhances the channel current and sucha device is said to operate in the
• The XOR gate will produce a HIGH output if only one but not both of the inputs is HIGH.
• The output of a logic gate is 1 when all its inputs are at logic 0. the gate is either
• How does the 4000 series of CMOS logic compare in terms of speed and power dissipation to the standard family of TTL logic?
• The digital logic family which has minimum power dissipation is
• Among the logic families, low power dissipation is in