The time required for a pulse to change from 10 to 90 percent of its maximum value is called

Related MCQs

• The time required for a pulse to decrease from 90 to 10 per cent of its maximum value is called
• The rise time (tr) is the time it takes for a pulse to rise from its                 point up to its point. The fall time (tf) is the length of time it takes to fall from the to the point.
• 8: A JK flip-lop has its J input connected to logic level 1 and its input to the Q output. A clock pulse is fed to its clock input. The flip-lop will now
• A J-K lip-lop has its J-input connected to logic level 1 and its input to the Q output pulse is fed to its clock input the flip-flop will now
• The time required for a gate or inverter to change its state is called
• The time needed for an output to change from the result of an input change is known as:
• The average transition delay time for the signal to propagate from input to output when the signals change in value. It is expressed in ns is
• A 8-bit serial in / parallel out shift register contains the value “8”,           clock signal(s) will be required to shift the value completely out of the register.
• A 8-bit serial in / parallel out shift register contains the value “8”,           clock signal(s) will be required to shift the value completely out of the register.
• Why are the maximum value of VOL and the minimum value of VOH used to determine the noise margin rather than the typical values for these parameters?