The average transition delay time for the signal to propagate from input to output when the signals change in value. It is expressed in ns is

Related Questions

• An output gate is connected to four input gates; the circuit does not function. Preliminary tests with the DMM indicate that the power is applied; scope tests show that the primary input gate has a pulsing signal, while the interconnecting node has no signal. The four load gates are all on different ICs. Which instrument will best help isolate the problem?
• When an input signal A=11001 is applied to a NOT gate serially, its output signal is
• A 2 MHz signal is applied to the input of a J-K lip-lop which is operating in the 'toggle' mode. The frequency of the signal at the output will be
• The time needed for an output to change from the result of an input change is known as:
• 8: A JK flip-lop has its J input connected to logic level 1 and its input to the Q output. A clock pulse is fed to its clock input. The flip-lop will now
• A J-K lip-lop has its J-input connected to logic level 1 and its input to the Q output pulse is fed to its clock input the flip-flop will now
• The minimum time for which the input signal has to be maintained at the input of flip-flop is called of the flip-flop.
• A logic probe is placed on the output of a gate and the display indicator is dim. A pulser is used on each of the input terminals, but the output indication does not change. What is wrong?
•                  occurs when the same clock signal arrives at different times at different clock inputs due to propagation delay
•                  occurs when the same clock signal arrives at different times at different clock inputs due to propagation delay.