The time needed for an output to change from the result of an input change is known as:

Related MCQs

• 8: A JK flip-lop has its J input connected to logic level 1 and its input to the Q output. A clock pulse is fed to its clock input. The flip-lop will now
• A J-K lip-lop has its J-input connected to logic level 1 and its input to the Q output pulse is fed to its clock input the flip-flop will now
• A logic probe is placed on the output of a gate and the display indicator is dim. A pulser is used on each of the input terminals, but the output indication does not change. What is wrong?
• The number of clock pulses needed to shift one byte of data from input to the output of a 4-bit shift register is
• The average transition delay time for the signal to propagate from input to output when the signals change in value. It is expressed in ns is
• THE FOUR OUTPUTS OF TWO 4-INPUT MULTIPLEXERS, CONNECTED TO FORM A 16-INPUT MULTIPLEXER, ARE CONNECTED TOGETHER THROUGH A 4-INPUT                   GATE
• If an S-R latch has a 1 on the S input and a 0 on the R input and then the S input goes to 0, the latch will be
• The input at the 1, 2, 4, 8 inputs to a 4-line to 16-line decoder with active- low outputs is 1110. As a result, output line 7 is driven LOW.
• which of the following rules states that if one input of an AND gate is always 1, the output is equal to the other input?
• Which of the following gates would output 1 when one input is 1 and other input is 0 ?