Model analysis of free surface flows are based on

Related MCQs

• If A is the area of the immersed surface, w is the specific weight of the liquid and ͞x is the depth of horizontal surface from the liquid surface, then the total pressure P on the surface is given by
• Water flows through a 2 cm dia. Pipe at 20 m/s. It then flows radially outward between two discs, 2 mm apart. When it reaches a radius of 40 cm its velocity, in m/s will be
• Surface tension is caused by the force of ..... at the free surface.
• The upper surface of the weir over which water flows is known as
• Model analysis of aeroplanes and projectiles moving at supersonic speed are based on
• It is proposed to model a submarine moving at 10 m/s by taking a 10 : 1 scale model. What velocity, in m/s, would be needed in the model study?
• What flow rate in m3/s, is needed using a 20 : 1 scale model of a dam over which 4m3/s of water flows?
• The height of the free surface above any point is known as
• A stationary body immersed in a river has a maximum pressure of 69 Kpa exerted on it at a distance of 5.4 m below the free surface. What velocity of river could be expected ?
• A circular plate 1 m in diameter submerged vertically in water such that its upper edge is 8 m below the free surface of water. The total hydrostatic pressure force on one side of the plate is