The upper surface of the weir over which water flows is known as

Related MCQs

• When the water flows over a rectangular suppressed weir the pressure beneath the nappe is
• If A is the area of the immersed surface, w is the specific weight of the liquid and ͞x is the depth of horizontal surface from the liquid surface, then the total pressure P on the surface is given by
• A circular plate 1 m in diameter submerged vertically in water such that its upper edge is 8 m below the free surface of water. The total hydrostatic pressure force on one side of the plate is
• Water flows through a 2 cm dia. Pipe at 20 m/s. It then flows radially outward between two discs, 2 mm apart. When it reaches a radius of 40 cm its velocity, in m/s will be
• Fresh water 2 m deep flows over the top of 4 m of salt water (S = 1.04). The pressure at the bottom, in kPa, is
• The effect of negative pressure beneath the nappe in case of flow of water over a rectangular suppressed weir is to
• What flow rate in m3/s, is needed using a 20 : 1 scale model of a dam over which 4m3/s of water flows?
• The head over a 90? V-notch weir increases from 0.15 m to 0.3 m. The ratio of the new discharge to the original discharge is
• If 1% error is encountered in the measurement of head over crest of a rectangular weir, the error in discharge will be nearly
• In order that the water shall never rise more than 100 cm above the crest for a discharge of 5 cube metres per second, the length of weir will be