A liquid compressed in a cylinder has a volume of 1 litre at 1 MN/m2 and a volume of 995 cu-cm at 2 MN / m2. The bulk modulus of elasticity would be

Related MCQs

• A pressure of 500 kPa applied to 2 m3 if liquid results in a volume change of 0.004 m3. The bulk modulus, in Mpa, is
• Bulk modulus of elasticity is the ratio of
• The value of bulk modulus of elasticity .......... with increase of pressure.
• The bulk modulus of elasticity
• A right circular cylinder open at the top is filled with liquid (specific gravity 1.2) and rotated about its vertical axis at such speed that half the liquid spills out. The pressure at centre of the bottom is
• A cylinder is kept on a horizontal boundary past which an ideal fluid flows perpendicular to cylinder axis. It will then experience
• If the pressure at any point in the liquid approaches the vapour pressure, the liquid starts vapourising and creates pockets or bubbles of dissolved gases and vapours. This phenomenon is known as
• If A is the area of the immersed surface, w is the specific weight of the liquid and ͞x is the depth of horizontal surface from the liquid surface, then the total pressure P on the surface is given by
• In case of forced vortex, the rise of liquid level at the ends is .... the fall of liquid level at the axis of rotation.
• ..... is a device which increases the intensity of pressure of a given liquid with the help of low pressure liquid of large quantity.