A pressure of 500 kPa applied to 2 m3 if liquid results in a volume change of 0.004 m3. The bulk modulus, in Mpa, is

Related MCQs

• A liquid compressed in a cylinder has a volume of 1 litre at 1 MN/m2 and a volume of 995 cu-cm at 2 MN / m2. The bulk modulus of elasticity would be
• At point A in a pipe line carrying water the diameter is 1 m, the pressure 98 kPa and the velocity 1 m/s. At point B, 2 m higher than A, the diameter is 0.5 m and the pressure 20 kPa. The direction of flow would be
• Predict the pressure, in kPa, at an elevation of 2000 m, in an isothermal atmosphere assuming T = 20?C. Assume Patm = 100 kPa
• A pressure rise of 500 kPa is needed across a pump in a pipe transporting 0.2 m2/s of water. If the pump is 85% efficient, the power needed, in kW, would be
• The value of bulk modulus of elasticity .......... with increase of pressure.
• ..... is a device which increases the intensity of pressure of a given liquid with the help of low pressure liquid of large quantity.
• If the pressure at any point in the liquid approaches the vapour pressure, the liquid starts vapourising and creates pockets or bubbles of dissolved gases and vapours. This phenomenon is known as
• Bulk modulus of elasticity is the ratio of
• The bulk modulus of elasticity
• What pressure, in Mpa, must be maintained in a diving bell, at a depth of 1200 m, to keep out the ocean water (S = 1.03)