What pressure, in Mpa, must be maintained in a diving bell, at a depth of 1200 m, to keep out the ocean water (S = 1.03)

Related MCQs

• A pressure of 500 kPa applied to 2 m3 if liquid results in a volume change of 0.004 m3. The bulk modulus, in Mpa, is
• The intensity of pressure in a liquid due to its depth will vary .... with depth.
• A rocket exits exhaust gases with p = 0.5 kg m3 out a 50 cm dia nozzle at a velocity of 1200 m/s. Estimate the thrust, in kN
• In order to keep out debris and other materials carried by water which are likely to damage turbine, provision is made by
• The density of air at 10?C and 1 Mpa abs in SI units is
• At point A in a pipe line carrying water the diameter is 1 m, the pressure 98 kPa and the velocity 1 m/s. At point B, 2 m higher than A, the diameter is 0.5 m and the pressure 20 kPa. The direction of flow would be
• Fresh water 2 m deep flows over the top of 4 m of salt water (S = 1.04). The pressure at the bottom, in kPa, is
• A mercury water manometer indicates a gauge difference of 400 mm. The difference in pressure, measured in metres of water, is
• A circular plate 1 m in diameter submerged vertically in water such that its upper edge is 8 m below the free surface of water. The total hydrostatic pressure force on one side of the plate is
• The pressure ....... as the depth of the liquid increases.