In case of a condensing turbine the pressure in the last stage of the turbine is

Related MCQs

• In a four stage compressor system first and third stage pressures are 1 and 9 kg/cm2 respectively. What will be the fourth stage delivery pressure
• A gas turbine cycle operates through pressures ratio of 5. Air enters the compressor at atmospheric pressure and 25?C and entry to the turbine is at 800?C. The thermal efficiency of the plant has been found to be 37%. Now, if compressor and turbine efficiencies of 80% are taken into account, the value, of thermal efficiency will be
• In case of pressure compounded impulse turbine, for the steam while flowing through the nozzle of second stage
• A gas turbine plant operates between 1 ata and 9 ata with minimum and maximum cycle temperature of 25?C and 1000?C. A two stage compressor is provided with perfect intercooling and work is equally divided between the two stages. The intermediate pressure will be
• In a condensing steam engine
• A gas used in gas engine trial was tested in a Boys Calorimeter. The pressure of gas supply was 7 cm of water column. If the barometric pressure is 760 mm of mercury, the absolute pressure of the gas would be
• The pressure of steam generated in a boiler as recorded by the Bourdon pressure gauge was 2.2 kg/sq-cm. If the barometer reads 774 mm of mercury the absolute pressure of steam would be
• A steam turbine in which a part of the steam turbine after partial expansion is used for process heating and the remaining steam is further expanded for power generation, is known as
• The steam pressure in a pass out turbine may be expected to be in the range
• A passout turbine generally operates on low pressure in the range