McqMate
Sign In
Hamberger menu
McqMate
Sign in
Sign up
Home
Forum
Search
Ask a Question
Sign In
McqMate Copyright © 2026
→
Mechanical Engineering
→
Heat Engines
→
A sample having pH value of 5 will be
Q.
A sample having pH value of 5 will be
A.
Neutral
B.
Acidic
C.
Alkalino
E.
None of the above
Answer» B. Acidic
2k
0
Do you find this helpful?
3
View all MCQs in
Heat Engines
Discussion
No comments yet
Login to comment
Related MCQs
A sample of water having pH value of 7 is
In an analysis report of a sample of coal, the percentage of one of the constituents is specified as 2.5%. This constituent could be
In an analysis report of a sample of coal the percentage of one of the constituents is specified as 3.5%. This constituent could be
The ideal output velocity of steam from a nozzle having an enthalpy drop of 100 kcal/kg will be
A system having connected load of 100 kW, peak load of 80 kW, base load of 20 kW and average load of 40 kW will have a load factor of
The mean effective pressure of a diesel cycle having fixed compression ratio will increase if cut off ratio will
If performance of SI engines of different manufacture having different capacities, sizes and systems are to be compared the common parameter would be
For steam engine having a throttle governor, a straight line is obtained when the total weight of steam used per hour is plotted against the indicated horse power. This line is known as
A gas turbine cycle operates through pressures ratio of 5. Air enters the compressor at atmospheric pressure and 25?C and entry to the turbine is at 800?C. The thermal efficiency of the plant has been found to be 37%. Now, if compressor and turbine efficiencies of 80% are taken into account, the value, of thermal efficiency will be
Which variety of coal has low calorific value?