For the same maximum pressure and heat input the least efficient cycle is

Related MCQs

• For the same maximum pressure and heat input, the most efficient cycle is
• For the same temperature limits and heat input, the most efficient cycle is
• For the same peak pressure and heat input
• For same heat input and same compression ratio
• For same compression ratio and same heat input
• A gas turbine plant operates between 1 ata and 9 ata with minimum and maximum cycle temperature of 25?C and 1000?C. A two stage compressor is provided with perfect intercooling and work is equally divided between the two stages. The intermediate pressure will be
• Rankine cycle efficiency for fixed steam temperature of any volume upto critical temperature will be maximum for steam pressure of
• A gas used in gas engine trial was tested in a Boys Calorimeter. The pressure of gas supply was 7 cm of water column. If the barometric pressure is 760 mm of mercury, the absolute pressure of the gas would be
• The pressure of steam generated in a boiler as recorded by the Bourdon pressure gauge was 2.2 kg/sq-cm. If the barometer reads 774 mm of mercury the absolute pressure of steam would be
• A gas turbine cycle operates through pressures ratio of 5. Air enters the compressor at atmospheric pressure and 25?C and entry to the turbine is at 800?C. The thermal efficiency of the plant has been found to be 37%. Now, if compressor and turbine efficiencies of 80% are taken into account, the value, of thermal efficiency will be